Acti 9K Isolator 4P 40A 415Vac - set of 3

This Acti9 SW product is a modular and reliable switch disconnector. It is a set of 3. It is a 4P switch disconnector with 40A le rated operational current at 415VAC. The Icw rated short-time withstand current is up to 480A during 300ms. The Icm rated short-circuit making capacity of the switch disconnector is 0.6kA. It is intended for new or renovated installation in residential and small commercial. This switch disconnector is used for control (opening and closing of circuits under load). It has a position contact indication suitable for industrial isolation, according to IEC 60947-3 standard. It is also used for disconnection of on-load electrical circuits already protected against overloads and short-circuits. This product is compatible with comb busbar and distribution block. It has an ON/OFF indication on the toggle at front of the device for local signaling. The electrical endurance goes up to 10000 cycles and the mechanical endurance goes up to 20000 cycles. It has a tunnel type terminals connection at upstream and downstream. The connection allows rigid copper cables with a cable cross-section from 1mm² to 35mm². The connection allows flexible copper cables with a cable cross-section from 1mm² to 25mm². The Ue rated operational voltage is up to 415VAC with an operating frequency of 50Hz to 60Hz. The Ui rated insulation voltage is 500VAC. It has a Uimp rated impulse withstand voltage of 4kV, conforming to IEC 60947-3 standard. It can be mounted on a DIN rail for modular installation. The width in 9mm pitches is 8. The dimensions are (W) 72mm x (H) 81mm x (D) 74mm. The product colour is white. The weight is 0.48kg. The pollution degree is 2. The level of tropicalisation is 2 (relative humidity 95% at 55°C). The tightening torque of the connection is 3.5N.m for the PZ2 screwdriver type. According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in modular enclosure. The operating temperature is from -5°C to +55°C. The storage temperature is from -25°C to +85°C. This product complies with IEC 60947-3 standard.

• Suitable for isolation, guarantees operational safety at the downstream
• No accidental contact with live parts, thanks to finger-proof IP 20 terminals

• Utilization category AC-22