

IIL
A9E18321
Brand: Schneider
Acti9 iIL single indicator light - Green - 110-230 Vac
This Acti9 iIL is a single-phase voltage presence
indicator light. The voltage is 110VAC to 230VAC or 110VDC to 130VDC. The red
light on the front face lights up to indicate that a voltage is present. The
connection could be done with flexible copper cables or with ferrule cables
from 0.5mm² up to 2 x 2.5mm². The tightening torque for the PZ1 screwdriver to
connect screw connections is 1N.m. The connection could be done with rigid
copper cables from 0.5mm² minimum up to 2 x 2.5mm2 maximum. It comes with
staggered terminals to simplify the connection. The LED indication light
maximum consumption per indicator light is 0.3W. The Operating frequency is
50Hz or 60Hz. The service life of the LED indicator light is 100000h of
constant lightning efficiency. Because of the non-interchangeability of LEDs it
is a maintenance-free device. The tropicalization is Treatment 2 (relative
humidity 95% at 55°C). The degree of protection is IP20. The pollution degree
is 3. The width in 9mm pitches is 2. The dimensions are (W) 18mm x (H) 82mm x
(D) 68mm. The weight is 65g. The operating temperature is -35°C to 70°C. The
storage temperature is -40°C to 80°C. This product complies with IEC/EN
60947-5-1 standard.
- Staggered terminals
to simplify connection
- Phase-separated
wall that can be divided to allow the teeth of all types of comb busbar to pass
through
- Voltage presents
maintenance-free indicator light (non-interchangeable LEDs)
- Compliant with IEC
60947-5-1 standard